Each gauge carries a calibration certificate giving actual values.

Salient Features For Lever Type Dial Gauges :
• Fitted with jewels and Swiss miniature ball bearings for smoother operation
• Highly sensitive at the same time robust dial gauge suitable for workshop use
• Auto reversal mechanism.
• Metric gauges conform to IS 11498-1985 and for the European market to DIN 2270-1985
• Inch gauges conform to ASME B89.1.10M-2001
• Each gauge carries a calibration certificate giving actual values.
• Available in two bezel diameters- 28mm and 38 mm
• Integral dovetail offers flexibility and rigidity for mounting of the gauge.
• Metric gauges have 2 mm tungsten carbide ball stylus while for inch gauges have 0.08-inch tungsten carbide ball stylus. Both are supplied with 8 mm spigot assembly as standard supply.
• No optional accessories are offered when suffix A is added to the type number.
• Additional 1 mm carbide ball stylus (0.04 inch for inch series) height gauge adaptor, universal clamp and 4 mm dovetail spigot assembly (1/4 inch for inch series) offered as optional accessories for the gauges when type number is with out suffix A

Supplied with 2mm/.08 inch tungsten carbide ball stylus and 8mm/3/8 inch spigot assembly only

Each gauge carries a calibration certificate giving actual values.

Salient Features Back Plunger Type Dial Gauges :
• Robust brass case and metallic bezel
• Highly accurate worm mechanism
• Back Plunger Type Dial Gauges suitable for difficult inspection locations as gauging plunger is at right angle to the dial.
• Back Plunger Type Dial Gauges For the American market, inch gauges conform to ASME B89.1.10M-2001

Salient Features For Depth Gauges :
• Depth Gauges Suitable for quick and easy measurements of bore depths.
• Depth Gauges Base with 80 mm length hardened and ground to the highest degree of flatness.
• Depth Gauges Supplied with a set of extension rods for measurement of wide variety of depths
• Depth Gauges Supplied with Tungsten Carbide contact point for longer life..
• Depth Gauges For the American market, Depth Gauges meeting the requirements of AGD standard available.

BAKER bore gauges allow rapid and accurate checking of bores for size, Ovality and taper as also wear of bores like Engine Cylinder bores etc. in the workshop or inspection room. All bore gauges operate on the proven principle of two diametrically opposite measuring points, one fixed and one moving with a spring loaded centralising shoe. To check the actual size of bore, the gauge must be set to size with a bore master (Master Setting Ring) of known diameter which is close to the size to be measured. Inserted into the bore, it is necessary to "rock" the gauge slowly to locate its measuring axis to the bore shown by the point of reversal of the indicator hand. The reading at that point is the deviation from set normal size. A range of interchangeable extension rods allows a single instrument to cover wide range of bore sizes.

Salient Features:
• Small bores from 10mm to 18mm
• Highly versatile 18-50mm bore gauge covers a large range for which one needs to generally purchase 2 bore gauges having ranges Ø 18-35mm and Ø 35-60mm.
• The third bore gauge covering a range of 50-150 mm, is widely used in Automobile, Aircraft, Engine and Pump manufacturers.
• High wear resistance due to carbide-tipped stationary and moving anvils.
• Extra wide bridge ensures automatic centering in the bore. Self-centralising feature of this bore gauge ensures that the measurement can be done with minimum of skill.
• Furnished in a sleek wooden case containing measurement anvils and extension rods with necessary tools.

 

Universal Test Sets

Salient Features Of Dial Instruments :
• Dial Instruments Consists of Back Plunger Dial Gauge, 'G' Clamp, Universal Clamp, Swinging Arm Assembly, Tool Post Holder, Holding Rod, Tommy Bar and Anvil.
• Dial Instruments Swinging Arm Assembly enables the back plunger dial gauge to be used for internal work up to a depth of 40 mm similar to a lever type gauge.
• Dial Instruments With 'G' Clamp, Tool Post Holder. Holding Rod and Universal Clamp allows multiple types of mountings possibilities.
• Dial Instruments Versatile combinations, allow gauging applications like concentricity checks, alignment of machine tools, testing parallelism and surface plate work.
• Dial Instruments Supplied in a sleek wooden case with accessories.
• Dial Instruments For the American market, Universal Test Set meeting the requirements of AGD standard available.