|
NG-3 Handle NG3000
NogaGrip-3 holds all blade holders.
Spare blades are kept inside the
handle. Designed for maximum
comfort in your hand.
|
|
S Holder EL02003
Holds S blades (3.2mm).
S holder telescopes from 30-115mm.
Length: 131mm.
|
| |
|
| HEAVY DUTY ø3.2mm |
| |
|
|
EDGE OFF EO1000
Disposable tool. A handy pocket clip is
a standard feature of this tool.
Includes: S10 blade mounted in an 8mm
painted hexagonal aluminum handle.
|
|
RAPID BURR RB1000
Steel housing for long life of handle.
Blade is replaceable.
Holds 3.2mm blades.
Includes: 12mm hexagonal aluminum
painted handle and S 10 blade.
|
| |
|
| |
|
All blades below are made of H.S.S.. Hardness 62-64Rc except S100 Cobalt 65-67Rc |
BLADES |
Order No. |
|
Incl. angle
degrees) |
Pkg. weight
(grams)
|
Package
quantity (degrees) |
Works best on |
S10 |
BS1010 |
|
40 |
31 |
10 |
steel, aluminum and plastic |
S10Tin |
BS1012 |
|
40 |
31 |
10 |
abrasive material |
S20 |
BS2010 |
|
60 |
33 |
10 |
brass and cast iron |
S20 Tin |
BS2012 |
|
60 |
33 |
10 |
stainless steel |
S30 |
BS3010 |
|
40 |
31 |
10 |
both int. and ext. burrs |
S35 |
BS3510 |
|
55 |
33 |
10 |
straight edges on most materials |
S60 |
BS6001 |
|
40 |
9 |
1 |
cross holes in difficult to reach places |
S100 Cobalt |
BS1018 |
|
45 |
32 |
10 |
plastic and hard materials |
S101 |
BK1010 |
|
40 |
29 |
10 |
fine edges on all materials |
S150 |
BK3010 |
|
45 |
27 |
10 |
holes as small as 1.5mm Dia. |
S202 |
BK2010 |
|
55 |
28 |
10 |
brass and cast iron fine edges |
L/R - for left and right hand users. |
|
|
| |
|
| |
|
| |
|
|
MAGIC BURR 2 NG2002
Will do almost all of your deburring jobs.
Includes: NG-2 handle, N1 and N2
blades.
MAGIC BURR 4 NG2004
Same as NG2002 with two extra blades
for cross holes in difficult to reach places
Includes: NG-2 handle, N1, N2, N3 and
N6 blades.
|
|
TELE BURR NG3002
Holds 2.6mm N blades.
Highly popular tool.
Includes: NG-3 handle, N holder,
N1 and N2 blades.
|
|
NG-2 Handle NG2000
NogaGrip-2 holds N blades (2.6mm).
Spare blades are kept inside the
handle. Designed for maximum
comfort in your hand.
|
|
NG-3 Handle NG3000
NogaGrip-3 holds all blade holders.
Spare blades are kept inside the
handle. Designed for maximum
comfort in your hand.
|
|
N Holder EL01033
Holds 2.6mm blades.
N holder telescopes from 25-115mm.
Length: 131mm.
|
| |
|
| |
|
| LIGHT DUTY ø2.6mm |
| |
|
TEDDYBURR TB1000
 |
Design for hard to reach locations.
Blade is replaceable.
Steel housing for long life of handle.
Includes: 8mm painted hexagonal aluminum handle and N1
blade.
|
|
| |
|
All blades below are made of H.S.S.. Hardness 62-64Rc except N10 Cobalt 65-67Rc |
BLADES |
Order No. |
|
Incl. angle
degrees) |
Pkg. weight
(grams)
|
Package
quantity (degrees) |
Works best on |
N1 |
BN1010 |
|
40 |
13 |
10 |
steel, aluminum and plastic |
N1 Tin |
BN1012 |
|
40 |
13 |
10 |
abrasive material |
N2 |
BN2010 |
|
80 |
14 |
10 |
brass and cast iron |
N2 Tin |
BN2012 |
|
80 |
14 |
10 |
stainless steel |
N10 Cobalt |
BN1310 |
|
45 |
13 |
10 |
plastic and hard materials |
N3 |
BN3010 |
|
50 |
13 |
10 |
both int. and ext. burrs |
N6 |
BN6001 |
|
40 |
6 |
1 |
cross holes in difficult to reach places |
L/R - for left and right hand users. |
|
|
| |
|
|
COUNTERSINK NG3100
The standard tool for countersinking.
Useful for chamfering deep holes.
Includes: NG-3 handle, C holder and
C20 countersink (20mm).
|
|
NG-3 Handle NG3000
NogaGrip-3 holds all blade holders.
Designed for maximum comfort in
your hand.
|
|
C Holder CH3000
Holds C12, C20 and C30
countersinks. M7 external thread.
Has an hexagonal cross section to
prevent rotating inside handle.
Length: 131mm.
|
| |
|
| |
|
| COUNTERSINKS |
| |
|
|
MINI REVERSIBLE RC1000
Very fine tool for deburring both back and front sides of holes.
Range: 3-5.5mm.
Includes: steel handle and R1 blade.
MEDIUM REVERSIBLE RC2000
Range: 5-10mm.
Includes: steel handle and R2 blade.
LARGE REVERSIBLE RC2200
Range: 10-22mm.
Includes: steel handle and R3 blade.
TO REPLACE THE BLADE
Pull the aluminum knob out of the handle. At its end there is an hexagonal key. Use this key to
replace the blade.
|
|
|
| |
|
All blades below are made of H.S.S.. Hardness 62-64Rc. |
BLADES |
Order No. |
|
Range (mm) |
Countersinking angles (degrees)
|
Weight (grams) |
Package quantity |
C12 |
BC1211 |
|
1-12 |
90 |
25 |
1 |
C20 |
BC2011 |
|
3-20 |
90 |
28 |
1 |
C30 |
BC3011 |
|
3-30 |
90 |
58 |
1 |
R1 |
BR1001 |
|
3-5.5 |
90 |
5 |
1 |
R2 |
BR2001 |
|
5-10 |
90 |
7 |
1 |
R3 |
BR3001 |
|
10-22 |
90 |
8 |
1 |
|
| |
|
| |
|
|
H.D. EXT. ROTODRIVE
NG3500
Chamfers the O.D. on bars and tubes.
Range: 8-28mm.
Includes: NG-3 handle, H.D. external
RotoDrive holder, and EX28 countersink.
|
|
H.D. ROTODRIVE NG3400
40mm displacement allows for heavy
duty burrs to be removed. Continuous
rotation of countersink enables very fast
chamfering.
Includes: NG-3 handle, H.D. cranked
RotoDrive holder and C20 countersink.
|
|
NG-1 Handle NG1000
NogaGrip-1 holds all S blades
(3.2mm). Designed for maximum
comfort in your hand.
|
|
NG-3 Handle NG3000
NogaGrip-3 holds all blade holders.
Designed for maximum comfort in
your hand.
|
|
H.D. RotoDrive Holder
EL0802
Heavy duty crancked
holder. External M7 thread
to hold C12, C20 and C30
countersinks.
h 40mm.
|
|
H.D. Ext. RotoDrive
Holder EL0902
Heavy duty crancked
holder. Accepts EX28
external countersink.
h 40mm.
|
| |
|
| COUNTERSINKS |
|
EXT. ROTODRIVE NG1700
Chamfers the O.D. on bars and tubes.
Quickest way to chamfer O.D. on
almost all materials.
Range: 4-18mm.
Includes: NG-1 handle and
external RotoDrive
EX18 countersink.
|
|
ROTODRIVE NG1200
The quickest way to chamfer by hand.
Single flute countersink provides a
smoother cut.
Includes: NG-1 handle and RD10.4
RotoDrive countersink.
|
All blades below are made of H.S.S.. Hardness 62-64Rc. |
BLADES |
Order No. |
|
Range (mm) |
Countersinking angles(degrees)
|
Weight (grams) |
Package quantity |
RD3.2 |
BC3201 |
|
0-3 |
90 |
6 |
1 |
RD6.3 |
BC6301 |
|
1-6.3 |
90 |
10 |
1 |
RD8.3 |
BC8301 |
|
1-8.3 |
90 |
12 |
1 |
RD10.4 |
BC1041 |
|
1-10.4 |
90 |
15 |
1 |
RD16.5 |
BC1651 |
|
1-16.5 |
90 |
34 |
1 |
C12 |
BC1211 |
|
1-12 |
90 |
25 |
1 |
C20 |
BC2011 |
|
3-20 |
90 |
28 |
1 |
C30 |
BC3011 |
|
3-30 |
90 |
58 |
1 |
EX18 |
EX2001 |
|
4-18 |
90 |
16 |
1 |
EX28 |
EX3001 |
|
8-28 |
90 |
40 |
1 |
|
| |
|
|
MINI SCRAPER NG3700
Ideal for tool and die makers.
Includes: NG-3 handle, D holder,
triangular mini scraper D50 blade and
hex key.
|
|
TRIANGULAR SCRAPER
NG3600
Used for standard scraping.
Includes: NG-3 handle,
T holder and triangular
scraper T70.
|
|
NG-3 Handle NG3000
NogaGrip-3 holds all blade holders.
Designed for maximum comfort in
your hand.
|
|
SC Handle SC1300
12mm anodized handle. Knurled
locking collar to control blade
extension.
Holds: D50, D66, D75, D77 and T80
scrapers.
Length: 120mm.
Hex. 12mm.
|
|
T Holder EL06023
T holder is designed to hold T50 and
T70 new scrapers.
Has M5 internal thread.
Length: 113mm
|
|
D Holder EL05003
D holder is designed to hold D50
and D66 blades. A 3mm setscrew
is holding the blade.
Hex key included.
Length: 131mm.
|
| |
|
| SCRAPERS |
|
INTERNAL SCRAPER NG3710
Ideal for cross-holes deburring.
Includes: NG-3 handle, D holder and Internal scraper
D66 blade.
|
|
ADJUSTABLE SCRAPER
SC8000
Ideal for scraping, trimming and deburring
almost all materials.
Includes: 12mm anodized handle and T80
double ended triangular scraper.
|
All blades below have hardness 62-64Rc, except D55 Carbide 1400-1700 HV, and T80 CR115 58-60Rc. |
BLADES |
Order No. |
|
Width/Length (mm) |
Included angle(degrees)
|
Weight (grams) |
Package quantity |
D50 |
BD5010 |
|
3.2 x 50 |
60 |
27 |
10 |
D55 Carbide |
BD5501 |
|
3.2 x 50 |
60 |
9 |
1 |
D66 |
BD6610 |
|
3.2 x 48 |
50 |
34 |
10 |
D75 |
BD7501 |
|
3.2 x 75 |
60 |
8 |
1 |
D77 |
BD7701 |
|
3.2 x 73 |
50 |
9 |
1 |
T50 |
BT5000 |
|
I.D3.5 x 51 |
60 |
8 |
1 |
T70 |
BT7000 |
|
I.D4.2 x 57 |
60 |
11 |
1 |
T80 |
BT8001 |
|
4.5 X 80 |
60 |
11 |
1 |
|
| |
|
|
NOGA O-RING BURR
NG1100
Removes burrs from internal O-ring
grooves.
Range: 0-3mm (groove width).
Includes: NG-1 handle and
O-ring blade.
|
|
NOGA V CUT NG3200
For deburring sheet metal 1-8mm.
Includes: NG-3 handle, L holder and
L3 blade.
|
|
NG-1 Handle NG1000
NogaGrip-1 holds all S blades
(3.2mm). Designed for maximum
comfort in your hand .
|
|
NG-3 Handle NG3000
NogaGrip-3 holds all blade holders.
Designed for maximum comfort in
your hand.
|
|
K Holder EL04003
Holds K blades with M3 screw.
Length: 135mm.
|
|
L Holder EL07013
Holds L blades. Blades are held in
a 3mm square hole and tightened
with 4mm setscrew.
Length: 131mm.
|
| |
|
| DOUBLE EDGE CUTTING |
| |
|
|
KEYWAY-BURR NG3300
Effectively removes burrs from internal
and external keyways.
Range: 2.4-11mm.
Includes: NG-3 handle, K holder
and N80K blade.
|
|
DOUBLE BURR DB1000
Simultaneously removes burrs from both
sides of sheet metal.
DB handle with safety guard to
protect your hand.
Unique round cutting blades
can be rotated and reversed
for long life. For corners,
use one blade only.
Range: 0-12mm.
Includes: DB handle,
hand guard and
two N80 blades.
|
| |
|
All blades are made of H.S.S.. Hardness 62-64Rc except N80M42 and N80KM42, 65-67Rc. |
BLADES |
Order No. |
|
Range (mm) |
Included angle(degrees)
|
Package Weight (grams) |
Package quantity |
N80 |
BN8010 |
|
0-12 |
55 |
35 |
10 |
N80M42 |
BN8043 |
|
0-12 |
55 |
33 |
10 |
N70K |
BN7001 |
|
1.2-8 |
55 |
5 |
1 |
N80K |
BN8110 |
|
2.4-11 |
55 |
30 |
10 |
N80KM42 |
BN8143 |
|
2.4-11 |
55 |
29 |
10 |
N90K |
BN9009 |
|
3-15 |
55 |
9 |
1 |
L3 |
BL3001 |
|
1-8 |
50 |
6 |
1 |
L4 |
BL4001 |
|
0-2.5 |
50 |
6 |
1 |
O-Ring |
BO1001 |
|
1-3 |
40 |
9 |
1 |
TC |
BC1001 |
|
Max. 3 |
90 |
8 |
1 |
|
| |
|
|
CONVEXED CERA-CUT
CR2000
Ideal for all plastic materials and
soft metals. Ideal for surface
scraping and parting line deflashing.
Blade can be replaced.
Includes: Cera-Cut handle and
250mm convexed radius blade.
|
|
CONCAVED CERA-CUT
CR2300
Ideal for all plastic materials and soft
metals. Ideal for curved edges and
small ridges. Blade can be replaced.
Includes: Cera-Cut handle and
15mm concaved radius blade.
|
|
To Remove blade
1. Remove the cap from the rear of
the tool.
2. Insert the cap in the round hole
and turn 90°.
3. Pull the blade out.
|
|
To insert blade
1. Insert the blade into the groove.
2. To secure the blade in place, hold
the blade and lightly tap the
handle against a solid surface.
|
|
CERA-CUT Handle
CR2100
A unique plastic handle that holds
the blade by its self gripping taper.
Storage space for spare blades.
Length: 135mm.
|
| |
|
| CERAMICS |
|
CERA-CUT CR1100
Ideal for deburring plastics and other
soft materials. Extremely long life.
Disposable tool.
Includes: 250mm convexed radius
ceramic blade, mounted in
ergonomically held handle with
soft grip.
|
|
CERAMIC DOUBLE BURR
DB5000
Ideal for deburring both sides of a
workpiece simultaneously.
Blade can be replaced.
Range: 1-11 mm.
Includes: V-shaped ceramic blade
mounted in ergonomically designed
DB handle with safety guard to protect
your hand.
|
| |
|
BLADES |
Order No. |
|
Material |
Included angle(degrees)
|
Weight (grams) |
Package quantity |
Applications |
Convexed |
CR2200 |
|
Ceramic 1250HV |
90 |
9 |
1 |
Ideal for surface cleaning
and parting line deflashing
|
Concaved |
CR2500 |
|
Ceramic 1250HV |
90 |
9 |
1 |
Ideal for curved edges and
small ridges
|
V Shaped |
CR5100 |
|
Ceramic 1250HV |
90 |
90 |
1 |
Removes burrs from both
sides simultaneously
|
|
| |
Pack dimensions: 169 x 117 x 26mm |
PROMO SETS
Deburrs: Steel ,aluminum and
plastic.
S PROMO SET NG8150
Includes:
NogaGrip 1 handle
10pcs. S10 blades.
N PROMO SET NG8000
Includes:
NogaGrip 2 handle
10pcs. N1 blades.
Best seller
|
Pack dimensions: 169 x 117 x 26mm |
B10 SET
Deburrs: Steel, aluminum and
Plastic
B10 SET SG6000
Includes:
NogaGrip 2 handle
20pcs. B10 Blades.
Free handle
|
Pack dimensions: 169 x 117 x 26mm |
ECONOMY SETS
Deburrs: Steel ,aluminum and
plastic.
S ECONOMY SET
NG8200
Includes:
NogaGrip 1 handle,20pcs. B10 Blades.
N ECONOMY SET
NG8050
Includes:
NogaGrip 2 handle
20pcs. N1 blades.
Free handle
|
| |
|
| SETS AND KITS |
| |
|
|
COBALT SETS
Deburrs: Plastic and hard
materials
S COBALT SET NG8250
Includes:
NogaGrip 1 handle
20pcs. S100 cobalt blades.
N COBALT SET NG8100
Includes:
NogaGrip 2 handle
20pcs. N10 cobalt blades.
Free handle
|
|
GOLDEN SETS
Deburrs: Abrasive materials for
long life
S10TiN NG8152
Includes: NogaGrip 1 handle,
10 Pcs., S10 TiN Blades
S20TiN NG8162
Includes: NogaGrip 1 handle,
10 Pcs., S20 TiN Blades
Free handle
|
|
TELE SETS
Deburrs: Steel ,aluminum, plastic,
brass and cast iron
S TELE SET NG8350
Includes:
NogaGrip 3 handle
S holder
5pcs. S10 blades
5pcs. S20 blades.
N TELE SET NG8300
Includes:
NogaGrip 3 handle
N holder
5pcs. N1 blades
5pcs. N2 blades.
Free handle
|
| |
|
|
PLATINUM BOX NG9500
Collected to meet the total requirements of tool
and die makers and for deburring specialists
Includes:
Double Burr
NogaGrip 1 handle
NogaGrip 3 handle
Teddy Burr handle
S holder
N holder
K holder + N80K
D holder + D50
D holder + D66
C holder + C20
T holder + T70
18mm external RotoDrive blade
10.4mm countersink RotoDrive.
Blades: N1, N2, S10, S20, S30 and S150.
Hex key (1.5mm).
Pack dimensions: 270 x 230 x 50mm
|
|
GOLD BOX NG9400
The most complete box for professional machinists
Includes:
NogaGrip 3 handle
Adjustable scraper
Plastic Edge Off handle.
S holder
N holder
C holder+C20
D holder+D50
K holder+N80K
Blades: N1, N2, S10, S20, S30, S150, D66 and 10.4
Countersink RotoDrive.
Hex key (1.5mm).
Pack dimensions: 270 x 230 x 50mm
|
 |
SILVER UNIKIT NG9300
Most suitable for MRO
Includes:
NogaGrip 3 handle
S holder
Medium reversible countersink
Plastic Edge Off handle
3.2mm RotoDrive countersink
10.4mm RotoDrive countersink
16.5mm RotoDrive countersink
18mm External RotoDrive
Blades: S10, S20 and S30.
Pack dimensions: 215 x 120 x 40mm
|
|
BRONZE UNIKIT NG9200
Most economical deburring kit for all machinists
Includes:
NogaGrip 3 handle
N holder
S holder
C holder + C20
D holder + D50
Blades: N1, N2, S10, S20, S30 and S150
Pack dimensions: 215 x 120 x 40mm
|
|
NOGA 007 SP1007
Deburring, cleaning, finishing and countersinking
Includes:
RB handle
O-Ring blade
RD16.5 RotoDrive countersink
RDE18 External RotoDrive countersink
Thread cleaner blade
S100 blade
S150 blade
Pack dimensions: 125 x 78 x 48mm
|
|
PLASTIC EDGE OFF SET EO2100
The most economical set
Includes:
EO handle + S10 blade, green sleeve (for aluminum)
EO handle + S20 blade, red sleeve (for brass & cast iron)
EO handle + S100 blade, blue sleeve (for steel)
EO handle + S150 blade, yellow sleeve (for plastic)
Pack dimensions: 222 x 78 x 22mm
|
|
NOGA MINI SET NG9100
Universal set
Includes:
NogaGrip 3 handle.
N holder - holds all N blades.
S holder - holds all S blades.
Blades: N1, N2, S10, S20, S30 and S150
Pack dimensions: 175 x 30 x 30mm
|
|
NOGA TRIO RB3000
Standard set
Includes:
RB handle + S20 blade, red sleeve (brass & cast iron)
RB handle + S100 blade, blue sleeve (steel & aluminium)
RB handle + S150 extra fine blade, yellow sleeve (plastic)
Pack dimensions: 175 x 50 x 20mm
|
| |
|
|
SOFT GRIP SG1000
Ergonomically held
handle. Two holes accepts
both S and N blades.
Includes: SG handle, S100
and N10 cobalt blades.
|
|
LIZA BURR LB1000
Double end blade holder
to utilize both N and S
blades. Telescopes from
20-110mm with N blades.
20-94mm with S blades.
Includes: Uni-handle, SN
holder, N1 and N2 blades.
|
|
SCRAPER SC1000
Double end scraper for
longer tool life. Can be
locked in required position.
Includes: Uni-handle and
double ended T120
triangular scraper.
|
|
LEADER NG3800
Chamfering straight or
curved edges. Ensures
45° chamfering.
Includes: NG-3 handle,
LD holder and L1 blade.
|
| |
|
| SPECIALTY TOOLS |
|
NOGA SLOT
CLEANER NG3210
Used to relieve corners of
narrow slots from 3.5mm.
Includes: NG-3 handle,
L holder and L5 blade.
(L7 double end blade for
cutting in two directions is
also available)
|
|
NOGA MINI CUT
NG3220
Used for deburring small
ridges in difficult to reach
places.
Range: 0-2.5mm.
Includes: NG-3 handle.
L holder and L4 blade.
|
|
NOGA CORNER
CLEANER NG3230
Effective corner relief.
Wide range of
applications.
Includes: NG-3 handle.
L holder and L6 blade.
|
|
THREAD CLEANER
NG1600
For cleaning damaged
internal threads. Minimum
Dia. 9mm. Maximum
thread pitch 3mm.
Includes: NG-1 handle and
TC blade.
|
|
PLASTIC RAPID
BURR RB1400
Holds all S blades
(3.2mm). The blade is
replaceable.
Includes: plastic handle
and S100 blade.
|
|
PLASTIC EDGE OFF
EO2000
Most competitive tool.
Holds all S blades
(3.2mm). The blade is
replaceable.
Includes: plastic handle
and S10 blade.
|
|
PLASTIC REAMER
SP8100
Deburr both inside and
outside edges of tube.
Made of plastic body.
Have 3 cutters.
Reamer for aluminum,
brass and copper tubing.
Range: 4-42mm.
|
| |
|
Blades |
Order No. |
|
Works best on |
N1 Carbide |
BN1029 |
|
hardened steel & special plastics |
N1 Diamond |
BN1028 |
|
glass & ceramics |
N2 Carbide |
BN2031 |
|
hardened steel & hard plastics |
N1 LH |
BN1026 |
|
steel, aluminum & plastic |
N1 LH TiN |
BN1027 |
|
steel, aluminum & plastic. For long life. |
S10 Carbide |
BS1016 |
|
hardened steel & plastic |
S10 Diamond |
BS1014 |
|
glass & ceramics |
S10 LH |
BS1011 |
|
steel, aluminum & plastic |
S10 LH TiN |
BS1013 |
|
steel, aluminum & plastic. For long life. |
S100 TiN |
BS1019 |
|
stainless steel & plastic. For long life. |
S20 Carbide |
BS2015 |
|
hardened materials & plastic |
S101 LH |
BK1011 |
|
H.D. shank for steel, aluminum & plastic |
S101 TiN |
BK1012 |
|
H.D. shank for steel, aluminum & plastic. For long life. |
S150 TiN |
BK3103 |
|
holes as small as 1.5mm Dia. For long life. |
S30 TiN |
BS3003 |
|
both int. & ext. burrs. For long life. |
S60 TiN |
BS6003 |
|
cross holes in difficult to reach places. For long life. |
S80 |
BS8001 |
|
shallow steps |
S80 TiN |
BS8003 |
|
shallow steps. For long life. |
S70 |
BS7001 |
|
straight edges |
L1 |
BL1001 |
|
steel and aluminum |
L5 |
BL5001 |
|
slots from 3.5mm |
L6 |
BL6001 |
|
sharp corners |
L7 |
BL7001 |
|
slots from 3.5mm. Double end. |
T120 |
BT1200 |
|
H.D. scraping. Double end. |
LH - for left hand users only. L/R - for left and right hand users.
|
|
| |
|
| |
|
|
| THE RIGHT CHOICE OF A HOLDER |
|
• Choose the kind of arms needed, articulated or PH (post holder).
• When zero-setting is very important, use fine adjustment at base (FAB).
In all other cases use fine adjustment on top (FAT).
• Decide what kind of base you want. Magnetic, vacuum or others.
• Depending on the type of indicator and job to be inspected, choose either
standard clamp or NOGA unique swivel clamp.
• Consult the relevant section in this catalog to choose the right holder.
|
|
ARTICULATED HOLDERS FAT |
NOGA
articulated holders
with
fine adjustment
on top
|
Due to its stability and ease of use, NOGA articulated holder has
become the industry most wanted.
• New fine adjustment on top with universal swivel clamp.
• Holds 6mm, 8mm, 3/8", dovetail and back lug.
• Central locking mechanism with NOGA designed spring loaded
bearing.
• Five axis holder.
• Powerful on/off magnetic base.
• Instant fixation in any position.
• Fast and easy to set up gauges into required position.
• Black finished arms.
|
All measurements are in mm unless otherwise mentioned. |
Holder |
Arm Length |
Magnet |
Order no. |
Bottom thread |
Weight |
Bottom arm |
Top arm |
Total |
Force |
Dimension |
|
D |
[Kg] |
L1 |
L2 |
L1 + L2 + L3 |
[N]
|
W |
L |
H |
NF61003 |
Ext. M5 |
0.520 |
56 |
51 |
178 |
320 |
30 |
40 |
35 |
NF60103 |
Ext. M5 |
0.320 |
56 |
51 |
178 |
|
– |
– |
– |
DG61003 |
Ext. M8 |
1.350 |
110 |
101 |
282 |
|
50 |
60 |
55 |
DG60103 |
Ext. M8 |
0.340 |
110 |
101 |
282 |
|
– |
– |
– |
MG61003 |
Ext. M8 |
1.900 |
133 |
113 |
317 |
|
50 |
60 |
55 |
MG60103 |
Ext. M8 |
0.900 |
133 |
113 |
317 |
|
– |
– |
– |
MA61003 |
Ext. M10 x 1.25 |
5.100 |
326 |
242 |
637 |
|
50 |
120 |
55 |
MA60103 |
Ext. M10 x 1.25 |
3.100 |
326 |
242 |
637 |
|
– |
– |
– |
|
|
|
|
|
|
|
| |
|
| ARTICULATED HOLDERS FAB |
| |
|
NOGA
articulated holders
with
fine adjustment
at base
|
NOGA has developed a unique fine adjustment mechanism which is
placed on the magnetic base. This mechanism allows the hand to rest
on the base rather than on the clamp of the indicator. Zero-setting
becomes faster than with any other mechanism.
• Unique single direction fine adjustment at base.
• Powerful on/off magnetic base.
• Holds 8mm or 3/8" and dovetail.
• Central locking mechanism with NOGA designed spring loaded
bearing.
• Five axis holder.
• Instant fixation in any position.
• Easy to set up gauges into required position.
• Black finished arms.
|
| |
|
All measurements are in mm unless otherwise mentioned. |
Holder |
Standarad Clamp |
Arm Length |
Magnet |
Order no. |
Weight |
Standarad Clamp |
Order No |
Bottom arm |
Top arm |
Total |
Force |
Dimension |
|
[Kg] |
D |
|
L1 |
L2 |
L1 + L2 + L3 |
[N]
|
W |
L |
H |
NF10403 |
0.520 |
8 |
FA1100 |
56 |
51 |
128.5 |
320 |
30 |
40 |
35 |
NF10433 |
0.520 |
3/8” |
FA1120 |
56 |
51 |
128.5 |
|
30 |
40 |
35 |
DG10503 |
1.400 |
8 |
FA1100 |
110 |
101 |
232.5 |
|
50 |
60 |
55 |
DG10533 |
1.400 |
3/8” |
FA1120 |
110 |
101 |
232.5 |
|
50 |
60 |
55 |
MG10503 |
1.900 |
8 |
FA1100 |
133 |
113 |
267.5 |
|
50 |
60 |
55 |
MG10533 |
1.900 |
3/8” |
FA1120 |
133 |
113 |
267.5 |
|
50 |
60 |
55 |
|
| |
NOGA
economical holders
with fine adjustment
on top
|
NOGA PH (Post Holder) holders are the latest improvement of the
traditional indicator holder.
• New fine adjustment on the top with universal swivel clamp.
• Holds 6mm, 8mm, 3/8”, dovetail and back lug.
• Powerful on/off magnetic base.
• Strong arm lock by using 3 points clamp.
• Easy to set up gauges into required position.
• Nickel plated arms.
|
|
|
All measurements are in mm unless otherwise mentioned. |
Holder |
Arm length and diameter |
3 Points Clamp |
Magnet |
Order no. |
Bottom Thread |
Weight |
Post |
Arm |
Order No. |
Force |
Dimension |
|
D3 |
[Kg] |
Dia (D1)X Length (L1) |
Dia (D2)X Length (L2) |
|
[N]
|
W |
L |
H |
PH6400 |
M8 |
1.700 |
ø14 x 203 |
ø12 x 175 |
PH0310 |
800 |
50 |
60 |
55 |
PH6410 |
M8 |
0.700 |
ø14 x 203 |
ø12 x 175 |
PH0310 |
|
- |
- |
- |
PH6600 |
M8 |
2.300 |
ø16 x 260 |
ø16 x 175 |
PH0312 |
|
50 |
75 |
55 |
PH6610 |
M8 |
1.070 |
ø16 x 260 |
ø16 x 175 |
PH0312 |
|
- |
- |
- |
PH6800 |
M10 x 1.25 |
3.450 |
ø18 x 350 |
ø16 x 210 |
PH0313 |
|
50 |
60 |
55 |
PH6810 |
M10 x 1.25 |
1.450 |
ø18 x 350 |
ø16 x 210 |
PH0313 |
|
- |
- |
- |
|
|
| PH HOLDERS FAB |
NOGA
economical holders
with fine adjustment
at base
|
|
PH holders with NOGA unique fine adjustment at base.
• Single direction fine adjustment at base.
• Powerful on/off magnetic base.
• Universal swivel clamp for all dial and test indicators.
• Holds 6mm, 8mm, 3/8", dovetail and back lug.
• Strong arm lock by using 3 points clamp.
• Easy to set up gauges into required position.
• Nickel plated arms.
|
| |
|
All measurements are in mm unless otherwise mentioned. |
Holder |
Arm length and diameter |
3 Points Clamp |
Universal Swivel Clamp |
Magnet |
Order no. |
Weight |
Post |
Arm |
Order No. |
Order No. |
Force |
Dimension |
|
[Kg] |
Dia (D1)X Length (L1) |
Dia (D2)X Length (L2) |
|
|
[N]
|
W |
L |
H |
PH3100 |
0.500 |
ø 10 x 120 |
ø 8 x 110 |
PH0315 |
FA1210 |
320 |
30 |
40 |
35 |
PH2040 |
1.700 |
ø 14 x 203 |
ø 12 x 185 |
PH0310 |
FA1410 |
|
50 |
60 |
55 |
PH4016 |
2.450 |
ø 16 x 260 |
ø 16 x 225 |
PH0312 |
FA1410 |
|
50 |
70 |
55 |
|
| |
|
|
SPECIALTY HOLDERS |
In respond to market demand NOGA offers 8 holders with special features.
 |
 |
Order no. |
Clamp |
|
NF1021 |
8mm |
• On/off switchable magnet.
• Magnet dimensions - W30 x L40 x H35.
• Magnet force - 320N.
• Weight: 0.575 Kg. |
NF1024 |
3/8” |
NF1030 |
8mm |
• Permanent magnet.
• Magnet dimensions - W16 x L60 x H32.
• Magnet force - 280N.
• Weight: 0.545 Kg.
|
NF1033 |
3/8” |
|
|
• 5 axis holder.
• Patented 360° fine adjustment at base.
• Holds indicator with stem and dovetail.
• Central locking mechanism with NOGA designed spring loaded
bearing.
• Bottom arm - 56mm.
• Top arm - 51mm.
• Black finished arms. |
NF1015 |
8mm |
• Used for centering of workpieces.
• Holds indicator with stem or dovetail. |
NF1018 |
3/8” |
• Central locking mechanism with spring loaded bearing.
• Bottom arm - 56mm.
• Top arm - 51mm.
• Centering rod ø 8mm x 40 mm.
• Black finished arms.
• Weight: 0.345 Kg. |
NF1022 |
universal |
• Universal fine adjustment, holds: 6mm, 8mm, 3/8”,
dovetail and back lug. |
MG71003 |
universal |
• New fine adjustment on top with universal swivel clamp.
• Holds 6mm, 8mm, 3/8", dovetail and back lug.
• Central locking mechanism with NOGA designed spring loaded
bearing.
• 5 axis holder.
• Powerful on/off magnetic base.
• Instant fixation in any position.
• Fast and easy to set up gauges into required position.
• Black finished arms.
• Bottom arm - 163.5 mm.
• Top arm - 113 mm.
• Bottom thread - Ext. M8.
• Magnet force - 800N.
• Magnet dimensions - W50 x L60 x H55.
• Weight: 1.950 Kg.
|
|
| |
|
| |
|
| SETS & INDICATORS |
| |
|
|
NOGA offers four sets combining the most popular holders with the
world’s best made indicators.
• Dial diameter 58 mm.
• Stem diameter 8 mm.
• Measuring range 10 mm.
• Graduations 0.01 mm.
|
• Lever-type test indicator, dial
diameter 39 mm.
• Measuring range 0.8 mm.
• Graduations 0.01 mm.
• Contact point 2 mm dia., 20.9 mm
length.
• Three dovetails for clamping.
|
|
| |
|
All measurements are in mm unless otherwise mentioned. |
Holder |
Arm length |
Indicators |
Magnet |
Order no. |
Bottom Thread |
Weight |
Bottom Arm |
Top Arm |
Total |
Order No. |
Dimension |
|
D |
[Kg] |
L1 |
L2 |
L1+L2+L3 |
|
W |
L |
H |
NF6150 |
Ext. M5 |
0.600 |
56 |
51 |
178 |
NF1000 |
30 |
40 |
35 |
NF1036 |
– |
0.360 |
56 |
51 |
178 |
NF1000 |
- |
- |
- |
DG6150 |
Ext. M8 |
1.600 |
110 |
101 |
282 |
DG1000 |
50 |
60 |
55 |
MG6150 |
Ext. M8 |
2.100 |
133 |
113 |
317 |
DG1000 |
50 |
60 |
55 |
|
| |
|
| BASES |
|
NOGA
bases
Eight different magnets ranging from the world’s
smallest switchable on/off (320N) to a large magnetic
base (1300N), a 350N vacuum base and 5 clamps
are offered for our customers’ choice.
|
All measurements are in mm unless otherwise mentioned. |
Order no. |
Type |
Weight [Kg] |
Force [N] |
Thread |
W |
L |
H |
NF0037 |
On/off magnet |
0.230 |
320 |
M5 |
30 |
40 |
35 |
NF3778 |
On/off magnet
with fine adj.
|
0.250 |
320 |
M5 |
30 |
40 |
35 |
DG0036 |
On/off magnet |
1.000 |
800 |
M8 |
50 |
60 |
55 |
DG3678 |
On/off magnet
with fine adj.
|
1.100 |
800 |
M8 |
50 |
60 |
55 |
DG0038 |
On/off magnet |
1.270 |
1000 |
M8 |
50 |
75 |
55 |
DG0118 |
On/off magnet
with fine adj.
|
1.380 |
1000 |
M8 |
50 |
75 |
55 |
DG0039 |
On/off magnet |
2.000 |
1300 |
M10 x 1.25 |
50 |
120 |
55 |
DG1003 |
On/off magnet
multi thread
|
1.350 |
1000 |
M6/8/10/12
10 x 1.25 |
50 |
75 |
55 |
DG0040 |
Vacuum base |
0.400 |
350 |
M8 |
– |
ø 92 |
– |
MA0322 |
4” clamp |
1.150 |
– |
Ext. M10 x 1.25 |
– |
100 |
– |
MA0320 |
4” clamp |
1.160 |
– |
Int. M10 x 1.25 |
– |
100 |
– |
MG1006 |
3” clamp |
0.570 |
– |
Ext. M8 |
– |
75 |
– |
MG1003 |
3” clamp |
0.600 |
– |
Int. M8 |
|
75 |
– |
MG0125 |
3” clamp
with plastic cover 75
|
0.600 |
– |
Int. M8 |
– |
75 |
– |
|
| MODULAR HOLDERS |
|
Five different sizes of articulated arms are offered for a wide range of
applications.
Choose the arms that fit your needs.
A number of accessories are shown below.
Custom-made accessories are available upon request. Minimum
quantity 500 pcs.
|
All measurements are in mm unless otherwise mentioned. |
Order no. |
Weight |
Int. Thread |
Arms Length |
|
[Kg] |
D1 |
D2 |
L1 |
L2 |
NF60003 |
0.210 |
M6 |
M6 |
56 |
51 |
DG60003 |
0.250 |
M6 |
M6 |
110 |
101 |
MG60003 |
0.750 |
M8 |
M6 |
133 |
113 |
MG70003 |
0.800 |
M8 |
M6 |
163 |
113 |
MA60003 |
3.000 |
M10 x 1.25 |
M6 |
326 |
242 |
|
| |
|
| COMPARATOR STANDS and CONCENTROMAT |
NOGA
comparator
stands
• Microlapped plates 2 microns flatness to DIN876 grade 00.
• Plates are made of hardened chrome rich steel. High wear resistance.
• Base and indicator holder are made of finest casting.
• Measures microns.
• 25 mm dia. Stainless steel post.
• Accepts all electronic and standard gauges.
• Polyurethane moldings under base prevent slipping.
|
All measurements are in mm unless otherwise mentioned. |
Order no. |
Total height |
Plate |
Plate Size |
Column |
Max. Measuring Height |
Cross arm |
Weight [Kg] |
SP6200* |
205 |
Serrated
anvil face |
78 x 78 |
ø 25 |
120 |
74 |
4 |
SP6400 |
193 |
Flat
anvil face |
Dia. 50 |
ø 25 |
100 |
74 |
2.4 |
* Available with fine adjustment (SP6300), available with ceramic plate and fine adjustment (SP6100). |
|
| |
| NOGA
concentromat |
The Concentromat is a universal gauge for checking the concentricity
of round parts having diameter of 1mm to 25mm. Used for checking
external diameter, internal diameter and curved surface.
Includes:
• Hardened and ground stainless steel plate.
• Two moving "V" blocks each with two replaceable carbide pins.
• Carbide stop, which is flat and perpendicular to the "V" blocks.
• Scrolling device.
• Retractable articulated arm for test indicator holder. (NF1000 test
indicator not included).
• All parts can be easily moved and set along the base, enabling parts
of different geometries to be tested.
|
|
|
|
|
