These are for hand operation only and are available in ¼" to ½" square drive covering Bolt/Nut across flat sizes 4 to 34 mm ( ¼" to 1 3/8" SAE) and equivalent British Sizes. Heavy duty sockets are available in ¾" and 1" square drives covering across flat sizes from 19 mm to 85 mm (9/16" to 3 ½" SAE) and equivalent British sizes. These heavy duty sockets are designed with a positive locking for its attachment with the driving tools having spring loaded ball & button. Deep sockets are also available to accommodate long studs.

These sockets are with built-in integral extension. These are suitable for impact applications and are available in single hex configuration in rigid as well as swivel joint design. These are provided with locking ring and pin and are available in various across flat sizes in 3/8" & ½" square drives with different lengths ranging from 100 mm to 250 mm.

These sockets have a built in swivel joint for impact applications. The swivel is a simple coupling device that allows the thing fastened to turn around freely upon it. It is a flexible sockets particularly useful for tightening nuts located at different angular positions. These are available in 3/8" & ½" square drives from 7 mm to 24 mm across flat & equivalent SAE sizes. The swivel sockets with built in extension are also available to cover reach up to 200 mm.

Universal joint is a coupler interposed between double hex sockets and driving tool. It is useful for tightening nuts located at difficult/angular positions. Universal joints are available from ¼" to 1" square drives.

A coupler that helps the operator to reach nut/bolts located at inaccessible places or where a driving tool cannot have access to sockets and /or where clearance for operation of driving tool is not available.
One end of the extension bar is male which fits into the square drive of the sockets and the other end is a female square drive where the driving tool fits in. The male and female square drive of this tool are of same size and are available for manual as well as impact application with drive sizes ranging from ¼" to 2 ½" square & length from 50mm to 500mm.

Square Drive Adaptors are used as a convertor to permit use of sockets and driving tools to different drive sizes. These are available in various combinations, ¼" Fx3/8"M, 3/8"Fx1/2"M, ½"Fx3/4"M, 1"Fx3/4"M, 1"Fx1 ½"M and vice versa. These are available for manual as well as impact use. For impact use, provision for locking ring and pin is there.

Reversible Ratchets

Taorque Master reversible ratchets have a feature of reversing the direction of operation in situ without detaching the sockets. It has built in mechanisms for both right and left operation. The ratchets have replaceable gear-pawl assembly and ratchet repair kit are available as spares. It is available in ¼" . 3/8", ½" , ¾" and 1" square drives.

This tool is used for driving of manually operated sockets. It has a large leverage handle which alloys application of force comfortably. Further final tightening can be done with both hands. The sliding T-Head is provided with a ball to arrest movement of handle at any desired position. ¼" sq to 2 ½ sq drive.

Used for driving manually operated sockets for working in restricted places. Manufactured in 3/8" (10mm), ½" (12.5mm) & ¾" (20mm) square drive.

Ratcheting spanners with double hex broaching are ideal for faster opening and loosening of the nuts and bolts. The tool has ratcheting mechanism which helps operator to complete his job comfortably without any fatigue. While operating, the tool does not require detaching and resetting on the job and the operation can be carried out continuously. The tool has broaching on both hands to cover two different sizes of nuts. The range covers across flat sizes 8 mm to 24 mm and 5/16" to 15/16". These have wider applications in general engineering industry and automobile production and servicing.

A driving tool for manually operated sockets to tighten nuts located at awkward places unapproachable by standard driving tools. It is manufactured in ¼" (6.3mm) to 1" (25mm) square drives. The handle in ¾" (20mm) & 1" (25mm) square drive tools is detachable from the swivel head.

Hex Adaptors are used for tightening of sockets cap screws and bolts. These are available in ¼" to 1" square drives to cover across flat sizes from 3mm to 36mm and 1/8" to 1 1/8" in standard and extra lengths for manual as well as impact use.

Torque Master Slugging Wrenches are designed for loosening of frozen and rusty nuts and bolts where impact or shock loading is required. These are used with hammer and are available in double hex broaching in straight pattern which applies force directly in the plain of the fastener head. The range covers across flat sizes 24mm to 140 mm (15/16" to 5 ½" SAE). Single Hex slugging wrenches can also be manufactured on customer's requirements.
We also offer offset pattern, because of its offset angle it raises the level of wrench above surface. Available 24mm to 60mm (15/16" to 2 ½")

Torque Master Tool kits are specially matched to meet tool storage needs of professional mechanics and service technicians. These very carefully designed set structure offer both an effective means of tool storage and a showcase appearance. Built to last, these kits are a wise investment because they hold their value.
Torque Master can even design and supply storage combinations, which will best meet your particular needs.